What’s the dissipation loss for a pressure transmitter?

The term ?dissipation loss? are available in the info sheet for a pressure sensor or pressure transmitter. One needs this specification in order to be in a position to protect the pressure sensor from overheating.
If a pressure sensor is operated in a hot environment, it might be necessary to limit its electrical power. If one neglects this aspect, one possibly risks an overheating sufficient reason for this, in the worst case, a total failure of the instrument. So how can the right electrical connection be managed?
Determination of the right electrical connection on the basis of the dissipation loss
First, the maximum permissible electrical energy for the pressure sensor must be known. This is given in the info sheet because the dissipation loss. Please note that the dissipation loss can be dependent upon the utmost expected operating temperature of the instrument and should be calculated where necessary.
If the allowable dissipation loss has been determined correctly, then the actual maximum electrical energy for the pressure sensor that occurs can be determined. The determination can be executed expediently in two steps:
1. Determination of the voltage at the pressure transmitter utilizing the following formula:
UPressure transmitter = UVoltage source ? RLoad � Imax. Current supply
2. Calculation of the maximum electrical energy for the pressure transmitter through the following equation:
PPressure transmitter = UPressure transmitter � Imax. Current supply
The maximum electrical power for the pressure transmitter (PPressure transmitter), that is now known, must be smaller than the permissible dissipation loss. If this is the case, both the power (UVoltage source) and the load (RLoad) were properly calculated and the electrical energy of the pressure sensor will undoubtedly be within the permissible range under all operating conditions. Consequently, the pressure transmitter won’t heat too strongly and will withstand the mandatory operating temperatures.
ราคาเกจวัดแรงดัน
Should you need any advice, your contact will gladly help you.

Leave a Comment